Page 2 of Technical Articles

If peculiar smell arise from ABS plastic locker, how do you deal with it? Here are some steps to clean the smell in plastic locker: (1) Use rice water to clean out the smell: take soft cloth dipped in the rice water, and add a little white vinegar, wipe the surface of ABS plastic lockers. This method...

ABS properties:  1. Good combination properties, high impact strength, chemical stability and excellent electrical properties; 2. Good weldability with organic class, which can be made into bicolor plastic parts. Its surface can be chrome-faced or sprayed. Common problems and solutions:  1....

ABS plastic electrolytic is the most important technology, so let's introduce the working process of ABS plastic electrolysis and things need to be aware of. When there are too many rubber particles after the coarsening, small pit becomes bigger and lack of binding force. If there is more polycarbonate,...

This technical article introduces some processing techniques of Acrylonitrile Butadiene Styrene. Forming technique Plastic ABS can be said the modification of polystyrene, which has higher impact strength and better mechanical strength than the HIPS. It has good process ability that can use injection...

This technical article introduces the formability of Acrylonitrile Butadiene Styrene. 1. Amorphous materials, which has medium flowing ability, moisture absorption. It must be fully dried, and shiny plastic parts must be long preheating dry 80-90 degrees for 3 hours; 2. You should choose high material...

ABS resin is one of the five synthetic resins, which not only has impact resistance, heat resistance, low temperature resistance, chemical resistance and excellent electrical properties, but also has easy processing, products good size stability, surface gloss, easy painting & coloring ability....

This technical article introduces five performance of ABS plastics, including general performance, mechanical property, and thermal performance, etc. General performance Plastic ABS is non-toxic, tasteless, ivory and translucent, and it is transparent granular or powder. Density is 1.05~1.18g/㎝3, shrinkage...

The biggest application fields of ABS are cars, electronic appliances and building materials. In automobile industry there are automotive dashboards, body outer panel, inner decorating plate, the steering wheel, sound insulation board, door locks, bumper, ventilation pipe and other parts. In terms of...

Performance test is through the automated test tool to simulate a variety of normal, peak and abnormal load conditions for test each performance index system. Here are five performances of ABS, which should be considered during the test: 1. General performance The appearance of the ABS is opaque ivory...